，較之焊接式和鑲刀粒槍鉆，不存在因為焊接而產生的熱應力，從而使得槍鉆在日常使用過程中穩定性好，降低因為焊接不牢而產生的掉頭現象，綜其上述固有優點，使得整體硬質合金槍鉆在使用過程中有更優異的孔加工穩定性，高效及使用壽命更長等優點。鉆星槍鉆硬度高、剛性好、精度準、經久耐用，性價比高。
Its shank and head are made of a whole carbide rod material ground without any brazing points in the middle. The deep space drilling machine tool is designed for different clamping methods, and Drillstar tools adopt corresponding tool handle styles to meet the clamping requirements of various brands of deep hole drilling machine tools.

Due to the fact that the cutting head and shank are made of integral hard alloy, which are ground in one operation on the machine tool during actual production, the overall straightness of the cutting tool is very good. Moreover, the cutting head and shank are not brazed, and compared to brazed and embedded gun drills, there is no thermal stress caused by brazing, which makes the gun drills stable in daily use and reduces the phenomenon of turning due to poor welding. Taking into account the above inherent advantages, The overall hard alloy gun drill has advantages such as better hole processing stability, high efficiency, and longer service life during use. Drillstar gun drills have high hardness, good rigidity, accurate accuracy, durability, and high cost-effectiveness.

優勢：Advantages
更高的強度和剛度
刀具壽命更長
最高生產率和更高的滲透率
Higher strength and stiffness
Longer tool life
Maximum productivity and higher penetration rate

整硬槍鉆尺寸直徑從0.90mm-12.00mm
最長可達360mm
Solid carbide gun drills range
Diameter from 0.9mm to 12.00mm
Max length 360mm

槍鉆領域fields：
槍鉆在造船

、汽車、發動機