-
18653418257 -
-
該拉床采用外切屑法。This broaching machine adopts external removing Chip method.
該機床適用于立柱材料，工件固定，刀具旋轉進給。This machine is suitable for column material，the workpiece is fixed and the tool is rotated to feed.
孔徑：φ5mm～φ30mmHole diameter：φ5mm～φ30mm
最大孔深Max hole depth：2000mm
工件外徑范圍Workpiece outside diameter range: ~φ60mm
數控系統CNC system：KND system
孔徑精度Hole accuracy：IT7～IT11
(1) 將工件安裝到專用夾頭上Install the workpiece to the dedicated chucks;
(2) 將刀具安裝到刀架上 Install the cutting tool to the tool holder;
(4) 打開冷卻系統Open the cooling system;
(5) 在加工過程中，刀具進給由系統以一定角度旋轉During machining, the tool feed is rotated by the system at a certain angle.
(6) Z軸進給系統驅動刀具進給Z axis feeding system drives the cutting tool to feed;
(7) 當加工到一定位置時，通過后驅動系統將刀具調整到一定高度When processing to a certain place, the cutting tool is adjusted to a certain height by the back-driving system;
(8) Z軸驅動系統驅動刀具后退 （9）切削刀具以其原始路線返回到工件的最前面，然后切削刀具旋轉一定角度The cutting tool returns to the most front of the workpiece with its original route, then the cutting tool rotates a certain angle. （10）重復步驟（5）-（9），完成工件的整個加工過程Repeat steps（5）--（9）, and finish the whole procession of the workpiece. Technical specification技術詳情 Parameter參數 Remarks備注 Work 工作范圍range hole inner diameter內孔范圍 Φ5～Φ30mm hole max depth最大加工深度 2000mm 機床功能Machine function X軸X-axis Feed rate進給速度 5～500mm/min endless Rapid travel rate快移速度 10000mm/min Motor torque扭矩 15Nm C軸C-axis Rapid travel rate快移速度 3000mm/min Motor torque電機扭矩 6Nm 定位精度/重新定位精度Positioning accuracy/ Re-Positioning accuracy 0.02mm 行程距離Distance of travel 360 degree Y軸Y-axis 電機扭矩Motor torque 15Nm 定位精度/重新定位精度Positioning accuracy/ Re-Positioning accuracy 0.03mm/0.02mm 機器總功率（appx.）Machine overall power (appx.) 13KW 占地面積（長×寬）占地面積（寬×長）Floor space (length × width)Floor space (length × width) 6500mm×2000mm 機器的總重量（約）Total weight of the machine (approx.) 7 tons CNC系統 KND系統 KND system Cooling system冷卻系統 最大的流量Maximum flow rate 10L/min adjustable ，同時刀具隨角度旋轉，完成一個加工過程Z-axis driving system drives the cutting tool to back off, at the meantime, the cutting tool rotates with its angle, to complete a procession.
CNC system
