，鑄鐵，不銹鋼，壓克力膠等多種材質我們選用不同鼻端形狀的深孔槍鉆進行加工

1.Structural steel, easy to cut steel, heat treated steel, carburized steel, nitrided steel, aluminum alloy, magnesium alloy, titanium alloy, yellow bronze, cast iron, stainless steel, acrylic adhesive, and other materials. We use deep hole gun drills with different nose shapes for processing

2.模具行業：流道孔,頂針孔,司筒等Mold industry: runner hole, ejector pin hole, barrel, etc

3.汽車零部件行業:轉向機輸入(出)軸

，齒條;變速箱齒輪軸等Automotive parts industry: steering gear input (output) shaft, rack; Transmission gear shaft, etc
3..發動機行業:曲軸,連桿,凸輪軸,缸體,缸蓋,活塞等Engine industry: crankshaft, connecting rod, camshaft, cylinder block, cylinder head, piston, etc
4.油泵油嘴行業:柱塞,噴油器體等Oil pump and nozzle industry: plunger, injector body, etc
5.發電設備,石油行業:管板加工Power generation equipment, petroleum industry: tube plate processing
5..其它行業: 軍工行業, 醫療器械行業,造紙行業Other industries: military industry, medical equipment industry, paper industry

可加工孔徑范圍Machinable aperture range
?深孔鉆機床(加工軸類零件)
孔徑范圍：φ1-32mm
Deep hole drilling machine (processing shaft parts)

孔徑精度：H7-H9
Aperture range: φ 1-32mm

表面粗糙度：Ra0.8-3.2
Surface roughness: Ra0.8-3.2

孔直線度：0.05-0.2/1000mm
Hole straightness: 0.05-0.2/1000mm

孔進出口位置偏差：0.2mm-0.5mm/400mm(不銹鋼棒料)
Deviation of hole inlet and outlet position: 0.2mm-0.5mm/400mm (stainless steel rod material)
?大型模具機床(加工箱體和棒料) Large mold machine tool (processing box and bar materials)
直徑范圍：φ4- 42mm

，單次鉆孔深度2000
Diameter range: φ 4-42mm, single drilling depth 2000

最大孔深：4000mm
Maximum hole depth: 4000mm

工作臺：2200×2000mm，最大載重16噸
Workbench: 2200 × 2000mm, maximum load capacity 16 tons

孔徑精度：H7-H9,
Aperture accuracy: H7-H9

表面粗糙度：Ra0.6-3.2 （基于45#鋼）
Surface roughness: Ra0.6-3.2 (based on 45 # steel)

孔直線度：0.05-0.1/1000mm
Hole straightness: 0.05-0.1/1000mm

孔進出口位置偏差：0.3-0.5/1000mm(板料)
0.1mm-0.3mm/1000mm(棒料)

Deviation of hole inlet and outlet position: 0.3-0.5/1000mm (sheet material)
0.1mm-0.3mm/1000mm (bar material)